How to shrink your stomach

How to shrink your stomach created by jack federbroke helpd me to loss weight so i want to feedback him for that thank you jack! How to shrink your stomach http://www.howtoshrinkyourstomach.net/

Wednesday, February 29, 2012

3D STUDIO MAX How to model Bathroom furniture step 67-87





 3D STUDIO MAX How to model Bathroom furniture step 67-87

Step 67: Select the outer polygons and Extrude them with an amount of 0.3cm and the Type Local Normal.
Step 68: Like we did with the sink make the outer vertices planer to X and Y.
Step 69: Delete the back polygon and Chamfer the edges with an amount of 0.025cm. Add a TurboSmooth modifier with 2 Iterations.
Step 70: Create a ChamferBox like we did in Step 1. Make the Length 0.3cm, the Width 1.0cm, the Height 4.5cm and the Fillet 0.05cm and 6 Segments. Using the Select and Move tool position the objects like you see below.


Step 71: Unhide and Position all the objects like i’ve did below.
Step 72: Create a Box with the Length and Width of 400.0cm and the Height of 300.0cm. Convert it to Editable Poly. Select the Left polygon, Inset it with a large amount to create the window hole and Delete it. Add a Shell modifier with an Outer Amount of 5.0cm. Convert to Editable Poly again and in Top view make sure the Left vertices are Planer to X.
Step 73: To change the render engine to VRay press F10 or click on the Render Setup icon on the main toolbar. Go in Common tab, click the 3 dots, select VRay and click OK. Also from Common Parameters change the Resolution width to 800 and the Height to 1100.
Step 74: Press “M” to open material editor or click on hes icon on the Main Toolbar. Select the first slot, click on Get Material, select VRayMtl and click OK.
Step 75: Select all the objects in the scene and in material editor click on Assign Material To Selection.
Step 76: From Create, Lights, Standard crate a Target Direct Light and position it like i’ve did. Check the Box for On and change the Shadows to VrayShadow. Change the Multiplier to 1.5 and the color to a light yellow. Change the Hotspot/Beam to 275.0cm and the Falloff/Filed to 300.0cm. Uncheck the box for Area Shadows and change the U,V,W size to 80.0cm.
Step 77: From Create, Lights, Vray create a VrayLight to fit the Window. Leave the Multiplier between 25-35, change the color the light blue, check the box for Invisible and change the Subdivs to 16.
Step 78: From Create, Camera create a Target Camera and using the tool in the lower right corner position it like i’ve did. To Show Safe Frame right click on Camera in the top left corner and click on Show Safe Frame.

Step 79: Select the 2nd slot in Material Editor, change it to VRayMtl and change the settings of the material like below. Assign it to the Sink.
Step 80: Create the Mirror_Material like bellow and apply it to the Mirror.
Step 81: Create the Metal_Material and assign it to the sink’s tap and the drawer’s handles.
Step 82: Create the Green_Material and assign it to the Mirror’s Shelf and to the Cabinet.
Step 83: Create the Glass_Material, select the Glass polygons of the Light and assign the Material to them. Press CTRL+I to invert the selection and assign the Metal_Material to the Light’s frame.

Step 84: To another object, a Glass, from Create, Shapes Create a line, Go Spline selection mode and Outline it. Fillet the Top vertices to create a smooth curve. Delete the lower segments. From the Modifier List add a Lathe Modifier and check the Box for Weld Core. If the outcome is not good click on Min, Center or Max in Align tab to see what works for you.
Step 85: Duplicate the Glass and assign the White_Material to them.
Step 86: Press F10 to open Render Setup and change the Setting as you see below. Since the Light cache is not visible change the Subdivs to 1500 and check the box for Show Calc. Phase.
Step 87: Press F9 or click on the Teapot on the main toolbar to Render the Image.

I hope you enjoyed reading this tutorial. Now you can download 3D model as a final result of this tutorial fromBuy3D.net – Bathroom Furniture. You can also sell 3D model result  you got from this tutorial and earn money on www.buy3d.net. Let this be an incentive to visit us again, enjoy the new tutorials and make money on the model you created thanks to this tutorial.

3d studio max tutorials How to model Bathroom furniture step 44-66

3d studio max tutorials How to model Bathroom furniture step 44-66

Step 44: Go in Element selection mode and holding down SHIFT copy the Handle 3 more times like below.
Step 45: To create the sink’s tap first create a Circle form Create, Shapes with a Radius of 5.5cm and 12 Interpolations steps. Convert the Circle to Editable Spline.
Step 46: Go in Segment selection mode and Delete the lower left one.
Step 47: Select the lower vertex and move it down like you see below. Convert the Vertex type to Corner.
Step 48: Move the handles of the selected vertex like you see below. Note: Press F8 if the handles get stuck in only one direction.
Step 49: Check the boxes for Enable in Viewport and Renderer. Change the Type to Rectangular, change the Length to 2.0cm, the Width to 0.75cm. Convert the object to Editable Poly.
Step 50: Connect the selected edges with 1 segments and a Slide of -30.
Step 51: Extrude the lower polygons with an amount of 2.5cm and the type Local Normal.
Step 52: Inset the Polygons with an amount of 0.5cm.
Step 53: Extrude the polygons again only this time with an amount of -0.5cm and also the type Local Normal.
Step 54: Select the edge i’ve selected (28 edges) and Chamfer them with an amount of 0.025cm.
Step 55: Remove the edges you see selected.
Step 56: Now select the polygon and Inset it with an amount of 0.1cm.
Step 57: Extrude the same polygon with an amount of -1.0cm and the type Local Normal.
Step 58: Select the edges and chamfer the with an amount of 0.01cm.
Step 59: Make a Ring selection of the edges and Connect the with 2 Segments and a Pinch of 80.
Step 60: Again, make a Ring selection of the side edges this time and also Connect them with 2 segments and a Pinch of 80.
Step 61: Select the polygons i’ve selected and Delete them.
Step 62: Go in Border selection mode, select the 2 borders and using the Select and Move tool copy them down 2 times holding SHIFT.
Step 63: Make a Ring selection of the edges and Connect them with 1 Segment and a Slide of -95.
Step 64: Add a TurboSmooth modifier from the modifier list and change the Iterations number to 2.
Step 65: Make a new Cylinder with the Radius of 1.8cm and the Height of 1.8cm. Change the Sides number to 16. Convert it to Editable Poly.
Step 66: Extrude the selected polygon with an amount of 0.5cm.

continue tutorial



3d studio max tutorials How to model Bathroom furniture step 23-43


3d studio max tutorials How to model Bathroom furniture step 23-43

Step 23: From Create, Shapes create an NGon with a Radius of 4.5cm and 16 sides. Position it in the middle of the sink.
Step 24: In Vertex mode using the Select and Move tool select and move the Vertices to fit the NGon vertices. Delete the NGon when you finish.
Step 25: Select the vertices i’ve selected and scale them down a little bit in the Y axis direction, move them up after that using the Select and Move tool to create a nice shape.
Step 26: Move the vertices from the left and right of the corner vertices closer to the corner vertices. I’ve you’re not following me on this just watch the below image.
Step 27: Make a Loop selection of the edges and Chamfer them with 1.0cm and 1 segment.
Step 28: Unhide all. Select the Border of the Sink and holding down SHIFT copy it down in the Z axis direction.
Step 29: Now make a Ring selection of the edge you see selected below. Like Loop select one edge and Click on Ring. Connect the selected edge with 1 Segment.
Step 30: Make a Loop selection now and Chamfer the edges with 1 segment and an amount of 0.1cm.
Step 31: From the Modifier List add a Turbosmooth with 2 Iterations. You can also rename this object to Sink.
Step 32: Create a Tube with Radius 1 of 4.5cm and Radius 2 of 3.0cm. Make the Height of 3.0cm and the Sides 64. Convert the Tube to Editable Poly.
Step 33: Hide Unselected. Make a Loop selection of the Inner edges and Chamfer them with 0.5cm and 10 Segments.
Step 34: Chamfer the Outer edges also with an amount of 0.2cm and 6 Segments.
Step 35: Now select these polygons, 128 polygons, and Delete them. Hint: If you make a Ring selection of the edges, hold down CTRL and click on the Polygon icon these will convert your selection from edges to polygons.
Step 36: Go in Border selection mode, select the top border, hold down SHIFT and using Select and Scale tool scale down the border to 93 in X and Y axis direction to copy them.
Step 37: Add a Smooth modifier from the modifier list and check the box for Auto Smooth. Unhide all and position the Tube to fit the Sink’s hole.
Step 38: Select the Cabinet’s top left box and Convert it to Editable poly. Inset the Top polygon with an amount of 1.5cm and Delete them.
Step 39: Create a new Box with the Length of 8.0cm, the Width of 1.0cm and the Height of 1.2cm. Change all the Segments number to 2. Convert it to Editable Poly.
Step 40: Select the Middle edges and Chamfer them with an amount of 3.9cm and 2 Segments.
Step 41: Using the exact same method we used in Step 41 chamfer the middle edges for the Length and Width also. Change the chamger amount to create something like below.
Step 42: Select the edges i’ve selected and scale them down to 40 in X axis direction.
Step 43: Add a Tutbosmooth modifier from the modifier list and change the Iterations to 2.



continue tutorial

App creators your key for sucsses








If you can click a mouse, you can
profit from online video!
Recent news articles show how some YouTubers are earning upwards of $100,000 per year from the ads they display on and around their videos...

What if you could earn money from those ads, without actually creating the content?
YOU CAN!

 

All you need to know in one place

Small step for huge knowledge
 
 
This is the place you learn everything you need to move forward and become the leader in programming and creating mobile apps.

No need to be an expert anyone can start from scratch !

You just need to find the area that interests you and access, from there the way to success is up to you .

Good Luck!

















 Click Here App Creators






App creators


guidescollection

i want to know

hello everyone

i wanted to ask from the viewers

if ther any subject thet you read and want continue reading and its not completed yet please let me know by comment or email

or if ther any subject thet you want me to add pls let me know